Any questions? Email to us: sales@chinaliftplatform.com
Any questions? Email to us: sales@chinaliftplatform.com
Self-Propelled Economical Vertical Lift is light and exquisite, convenient and flexible. It can pass through the general foyer, can enter and exit the elevator at will, save energy and electricity, and work without hurting the ground. It can be used for wall-mounted work and exploration work, and is widely used in hotels, hospitals, stations, airports, warehouses and other occasions. Safe and reliable operation performance, the base pothole protection device gives you a hundred times peace of mind.
Hydraulic Turning Wheel Type
MG600-1S | MG750-1S | MG750-2S | MG900-2S | |
Lift capacity | 125kg | 125kg | 200kg | 150kg |
Platform height max | 6m | 7.5m | 7.5m | 9m |
Stowed length | 1.36m | 1.36m | 1.5m | 1.5m |
Stowed width | 0.79m | 0.79m | 1.0m | 1.0m |
Stowed height | 2.08m | 2.08m | 2.08m | 2.08m |
Platform size | 0.78*0.70m | 0.78*0.70m | 1.00*0.70m | 1.00*0.70m |
Ground clearance | 0.05m | 0.05m | 0.05m | 0.05m |
Wheelbase | 1.15m | 1.15m | 1.28m | 1.28m |
Gradeability | 25% | 25% | 25% | 25% |
Maximum working slope | 1.5° | 1.5° | 3° | 3° |
Driving wheel | φ305*100mm | φ305*100mm | φ305*100mm | φ305*100mm |
Front tire | φ305*100mm | φ305*100mm | φ305*100mm | φ305*100mm |
Driving motor | 2*24V/0.4kw | 2*24V/0.4kw | 2*24V/0.5kw | 2*24V/0.5kw |
Lifting motor | 24V/2kw | 24V/2kw | 24V/2kw | 24V/2kw |
Power source | 2*12V/115Ah | 2*12V/115Ah | 2*12V/115Ah | 2*12V/115Ah |
Charger | 24V/12A | 24V/12A | 24V/12A | 24V/12A |
Weight | 1102kg | 1162kg | 1270kg | 1345kg |
Deatils:
Standard Configuration for Self-Propelled Economical Vertical Lift
1. Proportional controls
2. DC power supply
3. Drivable at full height
4. Beacon
5. Non marking tyre
6. 2WD
7. Automatic braking system
8. Anti burst valve on cylinder
9. Emergency stop button
10. Auxiliary lowering
11. On board Diagnostic system
12. Tilt sensor with alarm
13. Forklift pockets
14. Charger protection
15. All motion alarm
16. Horn
17. Double wheel brake
18. Hydraulic braking release
19. Anti-dust cover on the mast
20. Powder coating painting
Handling & Storage
The Self-propelled Aerial Order Picker must be stored in a horizontal position, in order to prevent the oil and the electrolyte will overflow, when transporting and storing.
When stores it, it must be kept clean and keep far away from the damp and bad climate. The temperature of environment should not be more than 40ºC.
If the battery isn't worked for a long time, it should be recharged timely.
Company Introduction
Chenlift (Suzhou) Machinery Co Ltd. is a suzhou-based world-wide supplier of lifting equipment with over 20 years of experience in the lifting industry, we have the knowledge to assist you in acquiring your next lifting equipment.
Other Related Products
